4.2.2. Native contacts analysis — MDAnalysis.analysis.contacts

This module contains classes to analyze native contacts Q over a trajectory. Native contacts of a conformation are contacts that exist in a reference structure and in the conformation. Contacts in the reference structure are always defined as being closer than a distance radius. The fraction of native contacts for a conformation can be calculated in different ways. This module supports 3 different metrics listed below, as well as custom metrics.

  1. Hard Cut: To count as a contact the atoms i and j have to be at least as close as in the reference structure.

  2. Soft Cut: The atom pair i and j is assigned based on a soft potential that is 1 if the distance is 0, 1/2 if the distance is the same as in the reference and 0 for large distances. For the exact definition of the potential and parameters have a look at function soft_cut_q().

  3. Radius Cut: To count as a contact the atoms i and j cannot be further apart than some distance radius.

The “fraction of native contacts” Q(t) is a number between 0 and 1 and calculated as the total number of native contacts for a given time frame divided by the total number of contacts in the reference structure.

4.2.2.1. Examples for contact analysis

4.2.2.1.1. One-dimensional contact analysis

As an example we analyze the opening (“unzipping”) of salt bridges when the AdK enzyme opens up; this is one of the example trajectories in MDAnalysis.

import numpy as np
import matplotlib.pyplot as plt
import MDAnalysis as mda
from MDAnalysis.analysis import contacts
from MDAnalysis.tests.datafiles import PSF,DCD
# example trajectory (transition of AdK from closed to open)
u = mda.Universe(PSF,DCD)
# crude definition of salt bridges as contacts between NH/NZ in ARG/LYS and
# OE*/OD* in ASP/GLU. You might want to think a little bit harder about the
# problem before using this for real work.
sel_basic = "(resname ARG LYS) and (name NH* NZ)"
sel_acidic = "(resname ASP GLU) and (name OE* OD*)"
# reference groups (first frame of the trajectory, but you could also use a
# separate PDB, eg crystal structure)
acidic = u.select_atoms(sel_acidic)
basic = u.select_atoms(sel_basic)
# set up analysis of native contacts ("salt bridges"); salt bridges have a
# distance <6 A
ca1 = contacts.Contacts(u, select=(sel_acidic, sel_basic),
                        refgroup=(acidic, basic), radius=6.0)
# iterate through trajectory and perform analysis of "native contacts" Q
ca1.run()
# print number of averave contacts
average_contacts = np.mean(ca1.results.timeseries[:, 1])
print('average contacts = {}'.format(average_contacts))
# plot time series q(t)
fig, ax = plt.subplots()
ax.plot(ca1.results.timeseries[:, 0], ca1.results.timeseries[:, 1])
ax.set(xlabel='frame', ylabel='fraction of native contacts',
       title='Native Contacts, average = {:.2f}'.format(average_contacts))
fig.show()

The first graph shows that when AdK opens, about 20% of the salt bridges that existed in the closed state disappear when the enzyme opens. They open in a step-wise fashion (made more clear by the movie AdK_zipper_cartoon.avi).

Notes

Suggested cutoff distances for different simulations

  • For all-atom simulations, cutoff = 4.5 Å

  • For coarse-grained simulations, cutoff = 6.0 Å

4.2.2.1.2. Two-dimensional contact analysis (q1-q2)

Analyze a single DIMS transition of AdK between its closed and open conformation and plot the trajectory projected on q1-q2 [Franklin2007]

import MDAnalysis as mda
from MDAnalysis.analysis import contacts
from MDAnalysisTests.datafiles import PSF, DCD
u = mda.Universe(PSF, DCD)
q1q2 = contacts.q1q2(u, 'name CA', radius=8)
q1q2.run()

f, ax = plt.subplots(1, 2, figsize=plt.figaspect(0.5))
ax[0].plot(q1q2.results.timeseries[:, 0], q1q2.results.timeseries[:, 1],
           label='q1')
ax[0].plot(q1q2.results.timeseries[:, 0], q1q2.results.timeseries[:, 2],
           label='q2')
ax[0].legend(loc='best')
ax[1].plot(q1q2.results.timeseries[:, 1],
           q1q2.results.timeseries[:, 2], '.-')
f.show()

Compare the resulting pathway to the MinActionPath result for AdK [Franklin2007].

4.2.2.1.3. Writing your own contact analysis

The Contacts class has been designed to be extensible for your own analysis. As an example we will analyze when the acidic and basic groups of AdK are in contact which each other; this means that at least one of the contacts formed in the reference is closer than 2.5 Å.

For this we define a new function to determine if any contact is closer than 2.5 Å; this function must implement the API prescribed by Contacts:

def is_any_closer(r, r0, dist=2.5):
    return np.any(r < dist)

The first two parameters r and r0 are provided by Contacts when it calls is_any_closer() while the others can be passed as keyword args using the kwargs parameter in Contacts.

Next we are creating an instance of the Contacts class and use the is_any_closer() function as an argument to method and run the analysis:

# crude definition of salt bridges as contacts between NH/NZ in ARG/LYS and
# OE*/OD* in ASP/GLU. You might want to think a little bit harder about the
# problem before using this for real work.
sel_basic = "(resname ARG LYS) and (name NH* NZ)"
sel_acidic = "(resname ASP GLU) and (name OE* OD*)"

# reference groups (first frame of the trajectory, but you could also use a
# separate PDB, eg crystal structure)
acidic = u.select_atoms(sel_acidic)
basic = u.select_atoms(sel_basic)

nc = contacts.Contacts(u, select=(sel_acidic, sel_basic),
                       method=is_any_closer,
                       refgroup=(acidic, basic), kwargs={'dist': 2.5})
nc.run()

bound = nc.results.timeseries[:, 1]
frames = nc.results.timeseries[:, 0]

f, ax = plt.subplots()

ax.plot(frames, bound, '.')
ax.set(xlabel='frame', ylabel='is Bound',
       ylim=(-0.1, 1.1))

f.show()

4.2.2.2. Functions

MDAnalysis.analysis.contacts.hard_cut_q(r, cutoff)[source]

Calculate fraction of native contacts Q for a hard cut off.

The cutoff can either be a float or a ndarray of the same shape as r.

Parameters

  • r (ndarray) – distance matrix

  • cutoff (ndarray | float) – cut off value to count distances. Can either be a float of a ndarray of the same size as distances

Returns

Q – fraction of contacts

Return type

float

MDAnalysis.analysis.contacts.soft_cut_q(r, r0, beta=5.0, lambda_constant=1.8)[source]

Calculate fraction of native contacts Q for a soft cut off

The native contact function is defined as [Best2013]

\[Q(r, r_0) = \frac{1}{1 + e^{\beta (r - \lambda r_0)}}\]

Reasonable values for different simulation types are

  • All Atom: lambda_constant = 1.8 (unitless)

  • Coarse Grained: lambda_constant = 1.5 (unitless)

Parameters

  • r (array) – Contact distances at time t

  • r0 (array) – Contact distances at time t=0, reference distances

  • beta (float (default 5.0 Angstrom)) – Softness of the switching function

  • lambda_constant (float (default 1.8, unitless)) – Reference distance tolerance

Returns

Q – fraction of native contacts

Return type

float

References

Best2013

RB Best, G Hummer, and WA Eaton, “Native contacts determine protein folding mechanisms in atomistic simulations” _PNAS_ 110 (2013), 17874–17879. doi: 10.1073/pnas.1311599110.

MDAnalysis.analysis.contacts.radius_cut_q(r, r0, radius)[source]

calculate native contacts Q based on the single distance radius.

Parameters

  • r (ndarray) – distance array between atoms

  • r0 (ndarray) – unused to fullfill Contacts API

  • radius (float) – Distance between atoms at which a contact is formed

Returns

Q – fraction of contacts

Return type

float

References

Franklin2007(1,2,3)

Franklin, J., Koehl, P., Doniach, S., & Delarue, M. (2007). MinActionPath: Maximum likelihood trajectory for large-scale structural transitions in a coarse-grained locally harmonic energy landscape. Nucleic Acids Research, 35(SUPPL.2), 477–482. doi: 10.1093/nar/gkm342

MDAnalysis.analysis.contacts.contact_matrix(d, radius, out=None)[source]

calculate contacts from distance matrix

Parameters

  • d (array-like) – distance matrix

  • radius (float) – distance below which a contact is formed.

  • out (array (optional)) – If out is supplied as a pre-allocated array of the correct shape then it is filled instead of allocating a new one in order to increase performance.

Returns

contacts – boolean array of formed contacts

Return type

ndarray

MDAnalysis.analysis.contacts.q1q2(u, select='all', radius=4.5)[source]

Perform a q1-q2 analysis.

Compares native contacts between the starting structure and final structure of a trajectory [Franklin2007].

Parameters

  • u (Universe) – Universe with a trajectory

  • select (string, optional) – atoms to do analysis on

  • radius (float, optional) – distance at which contact is formed

Returns

contacts – Contact Analysis that is set up for a q1-q2 analysis

Return type

Contacts

Changed in version 1.0.0: Changed selection keyword to select Support for setting start, stop, and step has been removed. These should now be directly passed to Contacts.run().

4.2.2.3. Classes

class MDAnalysis.analysis.contacts.Contacts(u, select, refgroup, method='hard_cut', radius=4.5, pbc=True, kwargs=None, **basekwargs)[source]

Calculate contacts based observables.

The standard methods used in this class calculate the fraction of native contacts Q from a trajectory.

Contact API

By defining your own method it is possible to calculate other observables that only depend on the distances and a possible reference distance. The Contact API prescribes that this method must be a function with call signature func(r, r0, **kwargs) and must be provided in the keyword argument method.

results.timeseries

2D array containing Q for all refgroup pairs and analyzed frames

Type

numpy.ndarray

timeseries

Alias to the results.timeseries attribute.

Deprecated since version 2.0.0: Will be removed in MDAnalysis 3.0.0. Please use results.timeseries instead.

Type

numpy.ndarray

Changed in version 1.0.0: save() method has been removed. Use np.savetxt() on Contacts.results.timeseries instead.

Changed in version 1.0.0: added pbc attribute to calculate distances using PBC.

Changed in version 2.0.0: timeseries results are now stored in a MDAnalysis.analysis.base.Results instance.

Changed in version 2.2.0: Contacts accepts both AtomGroup and string for select

Parameters

  • u (Universe) – trajectory

  • select (tuple(AtomGroup, AtomGroup) | tuple(string, string)) – two contacting groups that change over time

  • refgroup (tuple(AtomGroup, AtomGroup)) – two contacting atomgroups in their reference conformation. This can also be a list of tuples containing different atom groups

  • radius (float, optional (4.5 Angstroms)) – radius within which contacts exist in refgroup

  • method (string | callable (optional)) – Can either be one of ['hard_cut' , 'soft_cut', 'radius_cut'] or a callable with call signature func(r, r0, **kwargs) (the “Contacts API”).

  • pbc (bool (optional)) – Uses periodic boundary conditions to calculate distances if set to True; the default is True.

  • kwargs (dict, optional) – dictionary of additional kwargs passed to method. Check respective functions for reasonable values.

  • verbose (bool (optional)) – Show detailed progress of the calculation if set to True; the default is False.

Notes

Changed in version 1.0.0: Changed selection keyword to select