4.2.7.1.1. Ensemble Similarity Calculations — MDAnalysis.analysis.encore.similarity
- Author
Matteo Tiberti, Wouter Boomsma, Tone Bengtsen
New in version 0.16.0.
The module contains implementations of similarity measures between protein ensembles described in [ᵇLindorff-Larsen2009]. The implementation and examples are described in [ᵇTiberti2015].
The module includes facilities for handling ensembles and trajectories through
the Universe
class, performing clustering or dimensionality reduction
of the ensemble space, estimating multivariate probability distributions from
the input data, and more. ENCORE can be used to compare experimental and
simulation-derived ensembles, as well as estimate the convergence of
trajectories from time-dependent simulations.
ENCORE includes three different methods for calculations of similarity measures between ensembles implemented in individual functions:
Harmonic Ensemble Similarity :
hes()
Clustering Ensemble Similarity :
ces()
Dimensional Reduction Ensemble Similarity :
dres()
as well as two methods to evaluate the convergence of trajectories:
Clustering based convergence evaluation :
ces_convergence()
Dimensionality-reduction based convergence evaluation :
dres_convergence()
When using this module in published work please cite [ᵇTiberti2015].
References
- ᵇLindorff-Larsen2009
Kresten Lindorff-Larsen and Jesper Ferkinghoff-Borg. Similarity measures for protein ensembles. PLOS ONE, 4(1):1–13, 01 2009. doi:10.1371/journal.pone.0004203.
- ᵇTiberti2015(1,2,3,4,5,6,7,8,9)
Matteo Tiberti, Elena Papaleo, Tone Bengtsen, Wouter Boomsma, and Kresten Lindorff-Larsen. Encore: software for quantitative ensemble comparison. PLOS Computational Biology, 11(10):1–16, 10 2015. doi:10.1371/journal.pcbi.1004415.
Examples
The examples show how to use ENCORE to calculate a similarity measurement of two simple ensembles. The ensembles are obtained from the MDAnalysis test suite for two different simulations of the protein AdK.
To calculate the Harmonic Ensemble Similarity (hes()
)
two ensemble objects are first created and then used for calculation:
>>> from MDAnalysis import Universe
>>> import MDAnalysis.analysis.encore as encore
>>> from MDAnalysis.tests.datafiles import PSF, DCD, DCD2
>>> ens1 = Universe(PSF, DCD)
>>> ens2 = Universe(PSF, DCD2)
>>> HES, details = encore.hes([ens1, ens2])
>>> print(HES)
[[ 0. 38279540.04524205]
[38279540.04524205 0. ]]
HES can assume any non-negative value, i.e. no upper bound exists and the measurement can therefore be used as an absolute scale.
The calculation of the Clustering Ensemble Similarity (ces()
)
is computationally more expensive. It is based on clustering algorithms that in
turn require a similarity matrix between the frames the ensembles are made
of. The similarity matrix is derived from a distance matrix (By default a RMSD
matrix; a full RMSD matrix between each pairs of elements needs to be computed).
The RMSD matrix is automatically calculated:
>>> from MDAnalysis import Universe
>>> import MDAnalysis.analysis.encore as encore
>>> from MDAnalysis.tests.datafiles import PSF, DCD, DCD2
>>> ens1 = Universe(PSF, DCD)
>>> ens2 = Universe(PSF, DCD2)
>>> CES, details = encore.ces([ens1, ens2])
>>> print(CES)
[[0. 0.68070702]
[0.68070702 0. ]]
The RMSD matrix can also be separately calculated to reuse it, e.g. for running
CES with different parameters or running the
Dimensional Reduction Ensemble Similarity (dres()
) method.
DRES is based on the estimation of the probability density in
a dimensionally-reduced conformational space of the ensembles, obtained from
the original space using either the Stochastic Proximity Embedding algorithm or
the Principal Component Analysis.
In the following example the dimensions are reduced to 3 using the
RMSD matrix and the default SPE dimensional reduction method:
>>> from MDAnalysis import Universe
>>> import MDAnalysis.analysis.encore as encore
>>> from MDAnalysis.tests.datafiles import PSF, DCD, DCD2
>>> ens1 = Universe(PSF, DCD)
>>> ens2 = Universe(PSF, DCD2)
>>> rmsd_matrix = encore.get_distance_matrix(
... encore.utils.merge_universes([ens1, ens2]))
>>> DRES,details = encore.dres([ens1, ens2],
... distance_matrix = rmsd_matrix)
The RMSD matrix can also be saved on disk with the option save_matrix
:
rmsd_matrix = encore.get_distance_matrix(
encore.utils.merge_universes([ens1, ens2]),
save_matrix="rmsd.npz")
It can then be loaded and reused at a later time instead of being recalculated:
rmsd_matrix = encore.get_distance_matrix(
encore.utils.merge_universes([ens1, ens2]),
load_matrix="rmsd.npz")
In addition to the quantitative similarity estimate, the dimensional reduction
can easily be visualized, see the Example
section in
MDAnalysis.analysis.encore.dimensionality_reduction.reduce_dimensionality
.
Due to the stochastic nature of SPE, two identical ensembles will not
necessarily result in an exactly 0 estimate of the similarity, but will be very
close. For the same reason, calculating the similarity with the dres()
twice will not result in necessarily identical values but rather two very close
values.
It should be noted that both in ces()
and dres()
the similarity is
evaluated using the Jensen-Shannon divergence resulting in an upper bound of
ln(2), which indicates no similarity between the ensembles and a lower bound
of 0.0 signifying two identical ensembles. In contrast, the hes()
function uses
a symmetrized version of the Kullback-Leibler divergence, which is unbounded.
4.2.7.1.1.1. Functions for ensemble comparisons
- MDAnalysis.analysis.encore.similarity.hes(ensembles, select='name CA', cov_estimator='shrinkage', weights='mass', align=False, estimate_error=False, bootstrapping_samples=100, calc_diagonal=False)[source]
Calculates the Harmonic Ensemble Similarity (HES) between ensembles.
The HES is calculated with the symmetrized version of Kullback-Leibler divergence as described in [ᵇTiberti2015].
- Parameters
ensembles (list) – List of Universe objects for similarity measurements.
select (str, optional) – Atom selection string in the MDAnalysis format. Default is “name CA”
cov_estimator (str, optional) – Covariance matrix estimator method, either shrinkage, shrinkage, or Maximum Likelyhood, ml. Default is shrinkage.
weights (str/array_like, optional) – specify optional weights. If
mass
then chose masses of ensemble atomsalign (bool, optional) – Whether to align the ensembles before calculating their similarity. Note: this changes the ensembles in-place, and will thus leave your ensembles in an altered state. (default is False)
estimate_error (bool, optional) – Whether to perform error estimation (default is False).
bootstrapping_samples (int, optional) – Number of times the similarity matrix will be bootstrapped (default is 100), only if estimate_error is True.
calc_diagonal (bool, optional) – Whether to calculate the diagonal of the similarity scores (i.e. the similarities of every ensemble against itself). If this is False (default), 0.0 will be used instead.
- Returns
hes, details – Harmonic similarity measurements between each pair of ensembles, and dict containing mean and covariance matrix for each ensemble
- Return type
numpy.array, dictionary
Notes
The method assumes that each ensemble is derived from a multivariate normal distribution. The mean and covariance matrix are, thus, estimatated from the distribution of each ensemble and used for comparision by the symmetrized version of Kullback-Leibler divergence defined as:
\[D_{KL}(P(x) || Q(x)) = \int_{-\infty}^{\infty}P(x_i) ln(P(x_i)/Q(x_i)) = \langle{}ln(P(x))\rangle{}_P - \langle{}ln(Q(x))\rangle{}_P\]where the \(\langle{}.\rangle{}_P\) denotes an expectation calculated under the distribution \(P\).
For each ensemble, the mean conformation is estimated as the average over the ensemble, and the covariance matrix is calculated by default using a shrinkage estimation method (or by a maximum-likelihood method, optionally).
Note that the symmetrized version of the Kullback-Leibler divergence has no upper bound (unlike the Jensen-Shannon divergence used by for instance CES and DRES).
When using this similarity measure, consider whether you want to align the ensembles first (see example below).
Example
To calculate the Harmonic Ensemble similarity, two ensembles are created as Universe objects from a topology file and two trajectories. The topology- and trajectory files used are obtained from the MDAnalysis test suite for two different simulations of the protein AdK. You can use the
align=True
option to align the ensembles first. This will align everything to the current timestep in the first ensemble. Note that this changes theens1
andens2
objects:>>> from MDAnalysis import Universe >>> import MDAnalysis.analysis.encore as encore >>> from MDAnalysis.tests.datafiles import PSF, DCD, DCD2 >>> ens1 = Universe(PSF, DCD) >>> ens2 = Universe(PSF, DCD2) >>> HES, details = encore.hes([ens1, ens2]) >>> print(HES) [[ 0. 38279540.04524205] [38279540.04524205 0. ]] >>> print(encore.hes([ens1, ens2], align=True)[0]) [[ 0. 6889.89729056] [6889.89729056 0. ]]
Alternatively, for greater flexibility in how the alignment should be done you can call use an
AlignTraj
object manually:>>> from MDAnalysis import Universe >>> import MDAnalysis.analysis.encore as encore >>> from MDAnalysis.tests.datafiles import PSF, DCD, DCD2 >>> from MDAnalysis.analysis import align >>> ens1 = Universe(PSF, DCD) >>> ens2 = Universe(PSF, DCD2) >>> _ = align.AlignTraj(ens1, ens1, select="name CA", in_memory=True).run() >>> _ = align.AlignTraj(ens2, ens1, select="name CA", in_memory=True).run() >>> print(encore.hes([ens1, ens2])[0]) [[ 0. 6889.89729056] [6889.89729056 0. ]]
Changed in version 1.0.0:
hes
doesn’t accept the details argument anymore, it always returns the details of the calculation instead, in the form of a dictionary
- MDAnalysis.analysis.encore.similarity.ces(ensembles, select='name CA', clustering_method=<MDAnalysis.analysis.encore.clustering.ClusteringMethod.AffinityPropagationNative object>, distance_matrix=None, estimate_error=False, bootstrapping_samples=10, ncores=1, calc_diagonal=False, allow_collapsed_result=True)[source]
Calculates the Clustering Ensemble Similarity (CES) between ensembles using the Jensen-Shannon divergence as described in [ᵇTiberti2015].
- Parameters
ensembles (list) – List of ensemble objects for similarity measurements
select (str, optional) – Atom selection string in the MDAnalysis format. Default is “name CA”
clustering_method – A single or a list of instances of the
MDAnalysis.analysis.encore.clustering.ClusteringMethod
classes from the clustering module. Different parameters for the same clustering method can be explored by adding different instances of the same clustering class. Clustering methods options are the Affinity Propagation (default), the DBSCAN and the KMeans. The latter two methods need the sklearn python module installed.distance_matrix (encore.utils.TriangularMatrix) – Distance matrix clustering methods. If this parameter is not supplied the matrix will be calculated on the fly.
estimate_error (bool, optional) – Whether to perform error estimation (default is False). Only bootstrapping mode is supported.
bootstrapping_samples (int, optional) – number of samples to be used for estimating error.
ncores (int, optional) – Maximum number of cores to be used (default is 1).
calc_diagonal (bool, optional) – Whether to calculate the diagonal of the similarity scores (i.e. the similarities of every ensemble against itself). If this is False (default), 0.0 will be used instead.
allow_collapsed_result (bool, optional) – Whether a return value of a list of one value should be collapsed into just the value.
- Returns
ces, details – ces contains the similarity values, arranged in a numpy.array. If only one clustering_method is provided the output will be a 2-dimensional square symmetrical numpy.array. The order of the matrix elements depends on the order of the input ensembles: for instance, if
ensemble = [ens1, ens2, ens3]
the matrix elements [0,2] and [2,0] will both contain the similarity value between ensembles ens1 and ens3. Elaborating on the previous example, if n ensembles are given and m clustering_methods are provided the output will be a list of m arrays ordered by the input sequence of methods, each with a n*x*n symmetrical similarity matrix.
details contains information on the clustering: the individual size of each cluster, the centroids and the frames associated with each cluster.
- Return type
numpy.array, numpy.array
Notes
In the Jensen-Shannon divergence the upper bound of ln(2) signifies no similarity between the two ensembles, the lower bound, 0.0, signifies identical ensembles.
To calculate the CES, the affinity propagation method (or others, if specified) is used to partition the whole space of conformations. The population of each ensemble in each cluster is then taken as a probability density function. Different probability density functions from each ensemble are finally compared using the Jensen-Shannon divergence measure.
Examples
To calculate the Clustering Ensemble similarity, two ensembles are created as Universe object using a topology file and two trajectories. The topology- and trajectory files used are obtained from the MDAnalysis test suite for two different simulations of the protein AdK. To use a different clustering method, set the parameter clustering_method (Note that the sklearn module must be installed). Likewise, different parameters for the same clustering method can be explored by adding different instances of the same clustering class. Here the simplest case of just two instances of
Universe
is illustrated:>>> from MDAnalysis import Universe >>> import MDAnalysis.analysis.encore as encore >>> from MDAnalysis.tests.datafiles import PSF, DCD, DCD2 >>> ens1 = Universe(PSF, DCD) >>> ens2 = Universe(PSF, DCD2) >>> CES, details = encore.ces([ens1,ens2]) >>> print(CES) [[0. 0.68070702] [0.68070702 0. ]] >>> CES, details = encore.ces([ens1,ens2], ... clustering_method = [encore.DBSCAN(eps=0.45), ... encore.DBSCAN(eps=0.50)]) >>> print("eps=0.45: ", CES[0]) eps=0.45: [[0. 0.20447236] [0.20447236 0. ]]
>>> print("eps=0.5: ", CES[1]) eps=0.5: [[0. 0.25331629] [0.25331629 0. ]]
- MDAnalysis.analysis.encore.similarity.dres(ensembles, select='name CA', dimensionality_reduction_method=<MDAnalysis.analysis.encore.dimensionality_reduction.DimensionalityReductionMethod.StochasticProximityEmbeddingNative object>, distance_matrix=None, nsamples=1000, estimate_error=False, bootstrapping_samples=100, ncores=1, calc_diagonal=False, allow_collapsed_result=True)[source]
Calculates the Dimensional Reduction Ensemble Similarity (DRES) between ensembles using the Jensen-Shannon divergence as described in [ᵇTiberti2015].
- Parameters
ensembles (list) – List of ensemble objects for similarity measurements
select (str, optional) – Atom selection string in the MDAnalysis format. Default is “name CA”
dimensionality_reduction_method – A single or a list of instances of the DimensionalityReductionMethod classes from the dimensionality_reduction module. Different parameters for the same method can be explored by adding different instances of the same dimensionality reduction class. Provided methods are the Stochastic Proximity Embedding (default) and the Principal Component Analysis.
distance_matrix (encore.utils.TriangularMatrix) – conformational distance matrix, It will be calculated on the fly from the ensemble data if it is not provided.
nsamples (int, optional) – Number of samples to be drawn from the ensembles (default is 1000). This is used to resample the density estimates and calculate the Jensen-Shannon divergence between ensembles.
estimate_error (bool, optional) – Whether to perform error estimation (default is False)
bootstrapping_samples (int, optional) – number of samples to be used for estimating error.
ncores (int, optional) – Maximum number of cores to be used (default is 1).
calc_diagonal (bool, optional) – Whether to calculate the diagonal of the similarity scores (i.e. the simlarities of every ensemble against itself). If this is False (default), 0.0 will be used instead.
allow_collapsed_result (bool, optional) – Whether a return value of a list of one value should be collapsed into just the value.
- Returns
dres, details – dres contains the similarity values, arranged in numpy.array. If one number of dimensions is provided as an integer, the output will be a 2-dimensional square symmetrical numpy.array. The order of the matrix elements depends on the order of the input ensemble: for instance, if
ensemble = [ens1, ens2, ens3]
then the matrix elements [0,2] and [2,0] will both contain the similarity value between ensembles ens1 and ens3. Elaborating on the previous example, if n ensembles are given and m methods are provided the output will be a list of m arrays ordered by the input sequence of methods, each with a n*x*n symmetrical similarity matrix.
details provide an array of the reduced_coordinates.
- Return type
numpy.array, numpy.array
Notes
To calculate the similarity, the method first projects the ensembles into lower dimensions by using the Stochastic Proximity Embedding (or others) algorithm. A gaussian kernel-based density estimation method is then used to estimate the probability density for each ensemble which is then used to compute the Jensen-Shannon divergence between each pair of ensembles.
In the Jensen-Shannon divergence the upper bound of ln(2) signifies no similarity between the two ensembles, the lower bound, 0.0, signifies identical ensembles. However, due to the stochastic nature of the dimensional reduction in
dres()
, two identical ensembles will not necessarily result in an exact 0.0 estimate of the similarity but will be very close. For the same reason, calculating the similarity with thedres()
twice will not result in two identical numbers; small differences have to be expected.Examples
To calculate the Dimensional Reduction Ensemble similarity, two ensembles are created as Universe objects from a topology file and two trajectories. The topology- and trajectory files used are obtained from the MDAnalysis test suite for two different simulations of the protein AdK. To use a different dimensional reduction methods, simply set the parameter dimensionality_reduction_method. Likewise, different parameters for the same clustering method can be explored by adding different instances of the same method class. Here the simplest case of comparing just two instances of
Universe
is illustrated:>>> from MDAnalysis import Universe >>> import MDAnalysis.analysis.encore as encore >>> from MDAnalysis.tests.datafiles import PSF, DCD, DCD2 >>> ens1 = Universe(PSF,DCD) >>> ens2 = Universe(PSF,DCD2) >>> DRES, details = encore.dres([ens1,ens2]) >>> PCA_method = encore.PrincipalComponentAnalysis(dimension=2) >>> DRES, details = encore.dres([ens1,ens2], ... dimensionality_reduction_method=PCA_method)
In addition to the quantitative similarity estimate, the dimensional reduction can easily be visualized, see the
Example
section inMDAnalysis.analysis.encore.dimensionality_reduction.reduce_dimensionality`
4.2.7.1.1.2. Function reference
- MDAnalysis.analysis.encore.similarity.ces(ensembles, select='name CA', clustering_method=<MDAnalysis.analysis.encore.clustering.ClusteringMethod.AffinityPropagationNative object>, distance_matrix=None, estimate_error=False, bootstrapping_samples=10, ncores=1, calc_diagonal=False, allow_collapsed_result=True)[source]
Calculates the Clustering Ensemble Similarity (CES) between ensembles using the Jensen-Shannon divergence as described in [ᵇTiberti2015].
- Parameters
ensembles (list) – List of ensemble objects for similarity measurements
select (str, optional) – Atom selection string in the MDAnalysis format. Default is “name CA”
clustering_method – A single or a list of instances of the
MDAnalysis.analysis.encore.clustering.ClusteringMethod
classes from the clustering module. Different parameters for the same clustering method can be explored by adding different instances of the same clustering class. Clustering methods options are the Affinity Propagation (default), the DBSCAN and the KMeans. The latter two methods need the sklearn python module installed.distance_matrix (encore.utils.TriangularMatrix) – Distance matrix clustering methods. If this parameter is not supplied the matrix will be calculated on the fly.
estimate_error (bool, optional) – Whether to perform error estimation (default is False). Only bootstrapping mode is supported.
bootstrapping_samples (int, optional) – number of samples to be used for estimating error.
ncores (int, optional) – Maximum number of cores to be used (default is 1).
calc_diagonal (bool, optional) – Whether to calculate the diagonal of the similarity scores (i.e. the similarities of every ensemble against itself). If this is False (default), 0.0 will be used instead.
allow_collapsed_result (bool, optional) – Whether a return value of a list of one value should be collapsed into just the value.
- Returns
ces, details – ces contains the similarity values, arranged in a numpy.array. If only one clustering_method is provided the output will be a 2-dimensional square symmetrical numpy.array. The order of the matrix elements depends on the order of the input ensembles: for instance, if
ensemble = [ens1, ens2, ens3]
the matrix elements [0,2] and [2,0] will both contain the similarity value between ensembles ens1 and ens3. Elaborating on the previous example, if n ensembles are given and m clustering_methods are provided the output will be a list of m arrays ordered by the input sequence of methods, each with a n*x*n symmetrical similarity matrix.
details contains information on the clustering: the individual size of each cluster, the centroids and the frames associated with each cluster.
- Return type
numpy.array, numpy.array
Notes
In the Jensen-Shannon divergence the upper bound of ln(2) signifies no similarity between the two ensembles, the lower bound, 0.0, signifies identical ensembles.
To calculate the CES, the affinity propagation method (or others, if specified) is used to partition the whole space of conformations. The population of each ensemble in each cluster is then taken as a probability density function. Different probability density functions from each ensemble are finally compared using the Jensen-Shannon divergence measure.
Examples
To calculate the Clustering Ensemble similarity, two ensembles are created as Universe object using a topology file and two trajectories. The topology- and trajectory files used are obtained from the MDAnalysis test suite for two different simulations of the protein AdK. To use a different clustering method, set the parameter clustering_method (Note that the sklearn module must be installed). Likewise, different parameters for the same clustering method can be explored by adding different instances of the same clustering class. Here the simplest case of just two instances of
Universe
is illustrated:>>> from MDAnalysis import Universe >>> import MDAnalysis.analysis.encore as encore >>> from MDAnalysis.tests.datafiles import PSF, DCD, DCD2 >>> ens1 = Universe(PSF, DCD) >>> ens2 = Universe(PSF, DCD2) >>> CES, details = encore.ces([ens1,ens2]) >>> print(CES) [[0. 0.68070702] [0.68070702 0. ]] >>> CES, details = encore.ces([ens1,ens2], ... clustering_method = [encore.DBSCAN(eps=0.45), ... encore.DBSCAN(eps=0.50)]) >>> print("eps=0.45: ", CES[0]) eps=0.45: [[0. 0.20447236] [0.20447236 0. ]]
>>> print("eps=0.5: ", CES[1]) eps=0.5: [[0. 0.25331629] [0.25331629 0. ]]
- MDAnalysis.analysis.encore.similarity.ces_convergence(original_ensemble, window_size, select='name CA', clustering_method=<MDAnalysis.analysis.encore.clustering.ClusteringMethod.AffinityPropagationNative object>, ncores=1)[source]
Use the CES to evaluate the convergence of the ensemble/trajectory. CES will be calculated between the whole trajectory contained in an ensemble and windows of such trajectory of increasing sizes, so that the similarity values should gradually drop to zero. The rate at which the value reach zero will be indicative of how much the trajectory keeps on resampling the same regions of the conformational space, and therefore of convergence.
- Parameters
original_ensemble (
Universe
object) – ensemble containing the trajectory whose convergence has to estimatedwindow_size (int) – Size of window to be used, in number of frames
select (str, optional) – Atom selection string in the MDAnalysis format. Default is “name CA”
clustering_method (MDAnalysis.analysis.encore.clustering.ClusteringMethod) – A single or a list of instances of the ClusteringMethod classes from the clustering module. Different parameters for the same clustering method can be explored by adding different instances of the same clustering class.
ncores (int, optional) – Maximum number of cores to be used (default is 1).
- Returns
out – array of shape (number_of_frames / window_size, preference_values).
- Return type
np.array
Example
To calculate the convergence of a trajectory using the clustering ensemble similarity method a Universe object is created from a topology file and the trajectory. The topology- and trajectory files used are obtained from the MDAnalysis test suite for two different simulations of the protein AdK. Here the simplest case of evaluating the convergence is illustrated by splitting the trajectory into a window_size of 10 frames:
>>> from MDAnalysis import Universe >>> import MDAnalysis.analysis.encore as encore >>> from MDAnalysis.tests.datafiles import PSF, DCD, DCD2 >>> ens1 = Universe(PSF,DCD) >>> ces_conv = encore.ces_convergence(ens1, 10) >>> print(ces_conv) [[0.48194205] [0.40284672] [0.31699026] [0.25220447] [0.19829817] [0.14642725] [0.09911411] [0.05667391] [0. ]]
- MDAnalysis.analysis.encore.similarity.clustering_ensemble_similarity(cc, ens1, ens1_id, ens2, ens2_id, select='name CA')[source]
- Clustering ensemble similarity: calculate the probability densities from
the clusters and calculate discrete Jensen-Shannon divergence.
- Parameters
cc (encore.clustering.ClustersCollection) – Collection from cluster calculated by a clustering algorithm (e.g. Affinity propagation)
ens1 (
Universe
) – First ensemble to be used in comparisonens1_id (int) – First ensemble id as detailed in the ClustersCollection metadata
ens2 (
Universe
) – Second ensemble to be used in comparisonens2_id (int) – Second ensemble id as detailed in the ClustersCollection metadata
select (str) – Atom selection string in the MDAnalysis format. Default is “name CA”.
- Returns
djs – Jensen-Shannon divergence between the two ensembles, as calculated by the clustering ensemble similarity method
- Return type
- MDAnalysis.analysis.encore.similarity.cumulative_clustering_ensemble_similarity(cc, ens1_id, ens2_id, ens1_id_min=1, ens2_id_min=1)[source]
Calculate clustering ensemble similarity between joined ensembles. This means that, after clustering has been performed, some ensembles are merged and the dJS is calculated between the probability distributions of the two clusters groups. In particular, the two ensemble groups are defined by their ensembles id: one of the two joined ensembles will comprise all the ensembles with id [ens1_id_min, ens1_id], and the other ensembles will comprise all the ensembles with id [ens2_id_min, ens2_id].
- Parameters
- Returns
djs – Jensen-Shannon divergence between the two ensembles, as calculated by the clustering ensemble similarity method
- Return type
- MDAnalysis.analysis.encore.similarity.cumulative_gen_kde_pdfs(embedded_space, ensemble_assignment, nensembles, nsamples, ens_id_min=1, ens_id_max=None)[source]
Generate Kernel Density Estimates (KDE) from embedded spaces and elaborate the coordinates for later use. However, consider more than one ensemble as the space on which the KDE will be generated. In particular, will use ensembles with ID [ens_id_min, ens_id_max].
- Parameters
embedded_space (numpy.array) – Array containing the coordinates of the embedded space
ensemble_assignment (numpy.array) – array containing one int per ensemble conformation. These allow to distinguish, in the complete embedded space, which conformations belong to each ensemble. For instance if ensemble_assignment is [1,1,1,1,2,2], it means that the first four conformations belong to ensemble 1 and the last two to ensemble 2
nensembles (int) – Number of ensembles
nsamples (int) – Samples to be drawn from the ensembles. Will be required in a later stage in order to calculate dJS.
ens_id_min (int) – Minimum ID of the ensemble to be considered; see description
ens_id_max (int) – Maximum ID of the ensemble to be considered; see description. If None, it will be set to the maximum possible value given the number of ensembles.
- Returns
kdes (scipy.stats.gaussian_kde) – KDEs calculated from ensembles
resamples (list of numpy.array) – For each KDE, draw samples according to the probability distribution of the kde mixture model
embedded_ensembles (list of numpy.array) – List of numpy.array containing, each one, the elements of the embedded space belonging to a certain ensemble
- MDAnalysis.analysis.encore.similarity.dimred_ensemble_similarity(kde1, resamples1, kde2, resamples2, ln_P1_exp_P1=None, ln_P2_exp_P2=None, ln_P1P2_exp_P1=None, ln_P1P2_exp_P2=None)[source]
Calculate the Jensen-Shannon divergence according the Dimensionality reduction method.
In this case, we have continuous probability densities, this we need to integrate over the measurable space. The aim is to first calculate the Kullback-Liebler divergence, which is defined as:
\[D_{KL}(P(x) || Q(x)) = \int_{-\infty}^{\infty}P(x_i) ln(P(x_i)/Q(x_i)) = \langle{}ln(P(x))\rangle{}_P - \langle{}ln(Q(x))\rangle{}_P\]where the \(\langle{}.\rangle{}_P\) denotes an expectation calculated under the distribution P. We can, thus, just estimate the expectation values of the components to get an estimate of dKL. Since the Jensen-Shannon distance is actually more complex, we need to estimate four expectation values:
\[ \begin{align}\begin{aligned}\langle{}log(P(x))\rangle{}_P\\\langle{}log(Q(x))\rangle{}_Q\\\langle{}log(0.5*(P(x)+Q(x)))\rangle{}_P\\\langle{}log(0.5*(P(x)+Q(x)))\rangle{}_Q\end{aligned}\end{align} \]- Parameters
kde1 (scipy.stats.gaussian_kde) – Kernel density estimation for ensemble 1
resamples1 (numpy.array) – Samples drawn according do kde1. Will be used as samples to calculate the expected values according to ‘P’ as detailed before.
kde2 (scipy.stats.gaussian_kde) – Kernel density estimation for ensemble 2
resamples2 (numpy.array) – Samples drawn according do kde2. Will be used as sample to calculate the expected values according to ‘Q’ as detailed before.
ln_P1_exp_P1 (float or None) – Use this value for \(\langle{}log(P(x))\rangle{}_P\); if
None
, calculate it insteadln_P2_exp_P2 (float or None) – Use this value for \(\langle{}log(Q(x))\rangle{}_Q\); if
None
, calculate it insteadln_P1P2_exp_P1 (float or None) – Use this value for \(\langle{}log(0.5*(P(x)+Q(x)))\rangle{}_P\); if
None
, calculate it insteadln_P1P2_exp_P2 (float or None) – Use this value for \(\langle{}log(0.5*(P(x)+Q(x)))\rangle{}_Q\); if
None
, calculate it instead
- Returns
djs – Jensen-Shannon divergence calculated according to the dimensionality reduction method
- Return type
- MDAnalysis.analysis.encore.similarity.discrete_jensen_shannon_divergence(pA, pB)[source]
Jensen-Shannon divergence between discrete probability distributions.
- Parameters
pA (iterable of floats) – First discrete probability density function
pB (iterable of floats) – Second discrete probability density function
- Returns
djs – Discrete Jensen-Shannon divergence
- Return type
- MDAnalysis.analysis.encore.similarity.discrete_kullback_leibler_divergence(pA, pB)[source]
Kullback-Leibler divergence between discrete probability distribution. Notice that since this measure is not symmetric :: \(d_{KL}(p_A,p_B) != d_{KL}(p_B,p_A)\)
- Parameters
pA (iterable of floats) – First discrete probability density function
pB (iterable of floats) – Second discrete probability density function
- Returns
dkl – Discrete Kullback-Liebler divergence
- Return type
- MDAnalysis.analysis.encore.similarity.dres(ensembles, select='name CA', dimensionality_reduction_method=<MDAnalysis.analysis.encore.dimensionality_reduction.DimensionalityReductionMethod.StochasticProximityEmbeddingNative object>, distance_matrix=None, nsamples=1000, estimate_error=False, bootstrapping_samples=100, ncores=1, calc_diagonal=False, allow_collapsed_result=True)[source]
Calculates the Dimensional Reduction Ensemble Similarity (DRES) between ensembles using the Jensen-Shannon divergence as described in [ᵇTiberti2015].
- Parameters
ensembles (list) – List of ensemble objects for similarity measurements
select (str, optional) – Atom selection string in the MDAnalysis format. Default is “name CA”
dimensionality_reduction_method – A single or a list of instances of the DimensionalityReductionMethod classes from the dimensionality_reduction module. Different parameters for the same method can be explored by adding different instances of the same dimensionality reduction class. Provided methods are the Stochastic Proximity Embedding (default) and the Principal Component Analysis.
distance_matrix (encore.utils.TriangularMatrix) – conformational distance matrix, It will be calculated on the fly from the ensemble data if it is not provided.
nsamples (int, optional) – Number of samples to be drawn from the ensembles (default is 1000). This is used to resample the density estimates and calculate the Jensen-Shannon divergence between ensembles.
estimate_error (bool, optional) – Whether to perform error estimation (default is False)
bootstrapping_samples (int, optional) – number of samples to be used for estimating error.
ncores (int, optional) – Maximum number of cores to be used (default is 1).
calc_diagonal (bool, optional) – Whether to calculate the diagonal of the similarity scores (i.e. the simlarities of every ensemble against itself). If this is False (default), 0.0 will be used instead.
allow_collapsed_result (bool, optional) – Whether a return value of a list of one value should be collapsed into just the value.
- Returns
dres, details – dres contains the similarity values, arranged in numpy.array. If one number of dimensions is provided as an integer, the output will be a 2-dimensional square symmetrical numpy.array. The order of the matrix elements depends on the order of the input ensemble: for instance, if
ensemble = [ens1, ens2, ens3]
then the matrix elements [0,2] and [2,0] will both contain the similarity value between ensembles ens1 and ens3. Elaborating on the previous example, if n ensembles are given and m methods are provided the output will be a list of m arrays ordered by the input sequence of methods, each with a n*x*n symmetrical similarity matrix.
details provide an array of the reduced_coordinates.
- Return type
numpy.array, numpy.array
Notes
To calculate the similarity, the method first projects the ensembles into lower dimensions by using the Stochastic Proximity Embedding (or others) algorithm. A gaussian kernel-based density estimation method is then used to estimate the probability density for each ensemble which is then used to compute the Jensen-Shannon divergence between each pair of ensembles.
In the Jensen-Shannon divergence the upper bound of ln(2) signifies no similarity between the two ensembles, the lower bound, 0.0, signifies identical ensembles. However, due to the stochastic nature of the dimensional reduction in
dres()
, two identical ensembles will not necessarily result in an exact 0.0 estimate of the similarity but will be very close. For the same reason, calculating the similarity with thedres()
twice will not result in two identical numbers; small differences have to be expected.Examples
To calculate the Dimensional Reduction Ensemble similarity, two ensembles are created as Universe objects from a topology file and two trajectories. The topology- and trajectory files used are obtained from the MDAnalysis test suite for two different simulations of the protein AdK. To use a different dimensional reduction methods, simply set the parameter dimensionality_reduction_method. Likewise, different parameters for the same clustering method can be explored by adding different instances of the same method class. Here the simplest case of comparing just two instances of
Universe
is illustrated:>>> from MDAnalysis import Universe >>> import MDAnalysis.analysis.encore as encore >>> from MDAnalysis.tests.datafiles import PSF, DCD, DCD2 >>> ens1 = Universe(PSF,DCD) >>> ens2 = Universe(PSF,DCD2) >>> DRES, details = encore.dres([ens1,ens2]) >>> PCA_method = encore.PrincipalComponentAnalysis(dimension=2) >>> DRES, details = encore.dres([ens1,ens2], ... dimensionality_reduction_method=PCA_method)
In addition to the quantitative similarity estimate, the dimensional reduction can easily be visualized, see the
Example
section inMDAnalysis.analysis.encore.dimensionality_reduction.reduce_dimensionality`
- MDAnalysis.analysis.encore.similarity.dres_convergence(original_ensemble, window_size, select='name CA', dimensionality_reduction_method=<MDAnalysis.analysis.encore.dimensionality_reduction.DimensionalityReductionMethod.StochasticProximityEmbeddingNative object>, nsamples=1000, ncores=1)[source]
Use the DRES to evaluate the convergence of the ensemble/trajectory. DRES will be calculated between the whole trajectory contained in an ensemble and windows of such trajectory of increasing sizes, so that the similarity values should gradually drop to zero. The rate at which the value reach zero will be indicative of how much the trajectory keeps on resampling the same ares of the conformational space, and therefore of convergence.
- Parameters
original_ensemble (
Universe
object) – ensemble containing the trajectory whose convergence has to estimatedwindow_size (int) – Size of window to be used, in number of frames
select (str, optional) – Atom selection string in the MDAnalysis format. Default is “name CA”
dimensionality_reduction_method – A single or a list of instances of the DimensionalityReductionMethod classes from the dimensionality_reduction module. Different parameters for the same method can be explored by adding different instances of the same dimensionality reduction class.
nsamples (int, optional) – Number of samples to be drawn from the ensembles (default is 1000). This is akin to the nsamples parameter of dres().
ncores (int, optional) – Maximum number of cores to be used (default is 1).
- Returns
out – array of shape (number_of_frames / window_size, preference_values).
- Return type
np.array
Example
To calculate the convergence of a trajectory using the DRES method, a Universe object is created from a topology file and the trajectory. The topology- and trajectory files used are obtained from the MDAnalysis test suite for two different simulations of the protein AdK. Here the simplest case of evaluating the convergence is illustrated by splitting the trajectory into a window_size of 10 frames:
>>> from MDAnalysis import Universe >>> import MDAnalysis.analysis.encore as encore >>> from MDAnalysis.tests.datafiles import PSF, DCD, DCD2 >>> ens1 = Universe(PSF,DCD) >>> dres_conv = encore.dres_convergence(ens1, 10)
Here, the rate at which the values reach zero will be indicative of how much the trajectory keeps on resampling the same ares of the conformational space, and therefore of convergence.
- MDAnalysis.analysis.encore.similarity.gen_kde_pdfs(embedded_space, ensemble_assignment, nensembles, nsamples)[source]
Generate Kernel Density Estimates (KDE) from embedded spaces and elaborate the coordinates for later use.
- Parameters
embedded_space (numpy.array) – Array containing the coordinates of the embedded space
ensemble_assignment (numpy.array) – Array containing one int per ensemble conformation. These allow to distinguish, in the complete embedded space, which conformations belong to each ensemble. For instance if ensemble_assignment is [1,1,1,1,2,2], it means that the first four conformations belong to ensemble 1 and the last two to ensemble 2
nensembles (int) – Number of ensembles
nsamples (int) – samples to be drawn from the ensembles. Will be required in a later stage in order to calculate dJS.
- Returns
kdes (scipy.stats.gaussian_kde) – KDEs calculated from ensembles
resamples (list of numpy.array) – For each KDE, draw samples according to the probability distribution of the KDE mixture model
embedded_ensembles (list of numpy.array) – List of numpy.array containing, each one, the elements of the embedded space belonging to a certain ensemble
- MDAnalysis.analysis.encore.similarity.harmonic_ensemble_similarity(sigma1, sigma2, x1, x2)[source]
Calculate the harmonic ensemble similarity measure as defined in [ᵇTiberti2015].
- Parameters
sigma1 (numpy.array) – Covariance matrix for the first ensemble.
sigma2 (numpy.array) – Covariance matrix for the second ensemble.
x1 (numpy.array) – Mean for the estimated normal multivariate distribution of the first ensemble.
x2 (numpy.array) – Mean for the estimated normal multivariate distribution of the second ensemble.
- Returns
dhes – harmonic similarity measure
- Return type
- MDAnalysis.analysis.encore.similarity.hes(ensembles, select='name CA', cov_estimator='shrinkage', weights='mass', align=False, estimate_error=False, bootstrapping_samples=100, calc_diagonal=False)[source]
Calculates the Harmonic Ensemble Similarity (HES) between ensembles.
The HES is calculated with the symmetrized version of Kullback-Leibler divergence as described in [ᵇTiberti2015].
- Parameters
ensembles (list) – List of Universe objects for similarity measurements.
select (str, optional) – Atom selection string in the MDAnalysis format. Default is “name CA”
cov_estimator (str, optional) – Covariance matrix estimator method, either shrinkage, shrinkage, or Maximum Likelyhood, ml. Default is shrinkage.
weights (str/array_like, optional) – specify optional weights. If
mass
then chose masses of ensemble atomsalign (bool, optional) – Whether to align the ensembles before calculating their similarity. Note: this changes the ensembles in-place, and will thus leave your ensembles in an altered state. (default is False)
estimate_error (bool, optional) – Whether to perform error estimation (default is False).
bootstrapping_samples (int, optional) – Number of times the similarity matrix will be bootstrapped (default is 100), only if estimate_error is True.
calc_diagonal (bool, optional) – Whether to calculate the diagonal of the similarity scores (i.e. the similarities of every ensemble against itself). If this is False (default), 0.0 will be used instead.
- Returns
hes, details – Harmonic similarity measurements between each pair of ensembles, and dict containing mean and covariance matrix for each ensemble
- Return type
numpy.array, dictionary
Notes
The method assumes that each ensemble is derived from a multivariate normal distribution. The mean and covariance matrix are, thus, estimatated from the distribution of each ensemble and used for comparision by the symmetrized version of Kullback-Leibler divergence defined as:
\[D_{KL}(P(x) || Q(x)) = \int_{-\infty}^{\infty}P(x_i) ln(P(x_i)/Q(x_i)) = \langle{}ln(P(x))\rangle{}_P - \langle{}ln(Q(x))\rangle{}_P\]where the \(\langle{}.\rangle{}_P\) denotes an expectation calculated under the distribution \(P\).
For each ensemble, the mean conformation is estimated as the average over the ensemble, and the covariance matrix is calculated by default using a shrinkage estimation method (or by a maximum-likelihood method, optionally).
Note that the symmetrized version of the Kullback-Leibler divergence has no upper bound (unlike the Jensen-Shannon divergence used by for instance CES and DRES).
When using this similarity measure, consider whether you want to align the ensembles first (see example below).
Example
To calculate the Harmonic Ensemble similarity, two ensembles are created as Universe objects from a topology file and two trajectories. The topology- and trajectory files used are obtained from the MDAnalysis test suite for two different simulations of the protein AdK. You can use the
align=True
option to align the ensembles first. This will align everything to the current timestep in the first ensemble. Note that this changes theens1
andens2
objects:>>> from MDAnalysis import Universe >>> import MDAnalysis.analysis.encore as encore >>> from MDAnalysis.tests.datafiles import PSF, DCD, DCD2 >>> ens1 = Universe(PSF, DCD) >>> ens2 = Universe(PSF, DCD2) >>> HES, details = encore.hes([ens1, ens2]) >>> print(HES) [[ 0. 38279540.04524205] [38279540.04524205 0. ]] >>> print(encore.hes([ens1, ens2], align=True)[0]) [[ 0. 6889.89729056] [6889.89729056 0. ]]
Alternatively, for greater flexibility in how the alignment should be done you can call use an
AlignTraj
object manually:>>> from MDAnalysis import Universe >>> import MDAnalysis.analysis.encore as encore >>> from MDAnalysis.tests.datafiles import PSF, DCD, DCD2 >>> from MDAnalysis.analysis import align >>> ens1 = Universe(PSF, DCD) >>> ens2 = Universe(PSF, DCD2) >>> _ = align.AlignTraj(ens1, ens1, select="name CA", in_memory=True).run() >>> _ = align.AlignTraj(ens2, ens1, select="name CA", in_memory=True).run() >>> print(encore.hes([ens1, ens2])[0]) [[ 0. 6889.89729056] [6889.89729056 0. ]]
Changed in version 1.0.0:
hes
doesn’t accept the details argument anymore, it always returns the details of the calculation instead, in the form of a dictionary
- MDAnalysis.analysis.encore.similarity.prepare_ensembles_for_convergence_increasing_window(ensemble, window_size, select='name CA')[source]
Generate ensembles to be fed to ces_convergence or dres_convergence from a single ensemble. Basically, the different slices the algorithm needs are generated here.
- Parameters
- Returns
The original ensemble is divided into different ensembles, each being a window_size-long slice of the original ensemble. The last ensemble will be bigger if the length of the input ensemble is not exactly divisible by window_size.
- Return type
tmp_ensembles
- MDAnalysis.analysis.encore.similarity.write_output(matrix, base_fname=None, header='', suffix='', extension='dat')[source]
Write output matrix with a nice format, to stdout and optionally a file.
- Parameters
matrix (encore.utils.TriangularMatrix) – Matrix containing the values to be printed
base_fname (str) – Basic filename for output. If None, no files will be written, and the matrix will be just printed on standard output
header (str) – Text to be written just before the matrix
suffix (str) – String to be concatenated to basename, in order to get the final file name
extension (str) – Extension for the output file