Source code for MDAnalysis.coordinates.XYZ
# -*- Mode: python; tab-width: 4; indent-tabs-mode:nil; coding:utf-8 -*-
# vim: tabstop=4 expandtab shiftwidth=4 softtabstop=4
#
# MDAnalysis --- https://www.mdanalysis.org
# Copyright (c) 2006-2017 The MDAnalysis Development Team and contributors
# (see the file AUTHORS for the full list of names)
#
# Released under the GNU Public Licence, v2 or any higher version
#
# Please cite your use of MDAnalysis in published work:
#
# R. J. Gowers, M. Linke, J. Barnoud, T. J. E. Reddy, M. N. Melo, S. L. Seyler,
# D. L. Dotson, J. Domanski, S. Buchoux, I. M. Kenney, and O. Beckstein.
# MDAnalysis: A Python package for the rapid analysis of molecular dynamics
# simulations. In S. Benthall and S. Rostrup editors, Proceedings of the 15th
# Python in Science Conference, pages 102-109, Austin, TX, 2016. SciPy.
# doi: 10.25080/majora-629e541a-00e
#
# N. Michaud-Agrawal, E. J. Denning, T. B. Woolf, and O. Beckstein.
# MDAnalysis: A Toolkit for the Analysis of Molecular Dynamics Simulations.
# J. Comput. Chem. 32 (2011), 2319--2327, doi:10.1002/jcc.21787
#
"""XYZ trajectory reader --- :mod:`MDAnalysis.coordinates.XYZ`
==============================================================
The :ref:`XYZ format <xyz-format>` is a loosely defined, simple
coordinate trajectory format. The implemented format definition was
taken from the `VMD xyzplugin`_ and is therefore compatible with VMD.
Note the following:
* Comments are not allowed in the XYZ file (we neither read nor write
them to remain compatible with VMD).
* The atom name (first column) is ignored during reading.
* The coordinates are assumed to be space-delimited rather than fixed
width (this may cause issues - see below).
* All fields to the right of the z-coordinate are ignored.
* The unitcell information is all zeros since this is not recorded in
the XYZ format.
.. rubric:: Units
* Coordinates are in Angstroms.
* The length of a timestep can be set by passing the *dt* argument,
it's assumed to be in ps (default: 1 ps).
There appears to be no rigid format definition so it is likely users
will need to tweak this class.
.. _xyz-format:
XYZ File format
---------------
Definition used by the :class:`XYZReader` and :class:`XYZWriter` (and
the `VMD xyzplugin`_ from whence the definition was taken)::
[ comment line ] !! NOT IMPLEMENTED !! DO NOT INCLUDE
[ N ] # of atoms, required by this xyz reader plugin line 1
[ molecule name ] name of molecule (can be blank) line 2
atom1 x y z [optional data] atom name followed by xyz coords line 3
atom2 x y z [ ... ] and (optionally) other data.
...
atomN x y z [ ... ] line N+2
Note
----
* comment lines not implemented (do not include them)
* molecule name: the line is required but the content is ignored
at the moment
* optional data (after the coordinates) are presently ignored
.. Links
.. _`VMD xyzplugin`: http://www.ks.uiuc.edu/Research/vmd/plugins/molfile/xyzplugin.html
Classes
-------
"""
import itertools
import os
import errno
import numpy as np
import warnings
import logging
logger = logging.getLogger('MDAnalysis.coordinates.XYZ')
from . import base
from .timestep import Timestep
from ..lib import util
from ..lib.util import cached, store_init_arguments
from ..exceptions import NoDataError
from ..version import __version__
[docs]class XYZWriter(base.WriterBase):
"""Writes an XYZ file
The XYZ file format is not formally defined. This writer follows
the VMD implementation for the molfile `xyzplugin`_.
Notes
-----
By default, the XYZ writer will attempt to use the input
:class:`~MDAnalysis.core.groups.AtomGroup` or
:class:`~MDAnalysis.core.universe.Universe` ``elements`` record to assign
atom names in the XYZ file. If the ``elements`` record is missing, then
the ``name`` record will be used. In the event that neither of these are
available, the atoms will all be named ``X``. Please see, the
`User Guide`_ for more information on how to add topology attributes if
you wish to add your own elements / atom names to a
:class:`~MDAnalysis.core.universe.Universe`.
.. Links
.. _xyzplugin:
http://www.ks.uiuc.edu/Research/vmd/plugins/molfile/xyzplugin.html
.. _User Guide:
https://userguide.mdanalysis.org/examples/constructing_universe.html#Adding-topology-attributes
.. versionchanged:: 1.0.0
Use elements attribute instead of names attribute, if present.
.. versionchanged:: 2.0.0
Support for passing timestep to the writer was deprecated in 1.0 and
has now been removed. As a consequence, custom names can no longer be
passed to the writer, these should be added to the
:class:`~MDAnalysis.core.universe.Universe`, or
:class:`~MDAnalysis.core.groups.AtomGroup` before invoking the writer.
"""
format = 'XYZ'
multiframe = True
# these are assumed!
units = {'time': 'ps', 'length': 'Angstrom'}
def __init__(self, filename, n_atoms=None, convert_units=True,
remark=None, **kwargs):
"""Initialize the XYZ trajectory writer
Parameters
----------
filename: str
filename of trajectory file. If it ends with "gz" then the file
will be gzip-compressed; if it ends with "bz2" it will be bzip2
compressed.
n_atoms: int (optional)
Number of atoms in trajectory. By default assume that this is None
and that this file is used to store several different models
instead of a single trajectory. If a number is provided each
written TimeStep has to contain the same number of atoms.
convert_units : bool (optional)
convert quantities to default MDAnalysis units of Angstrom upon
writing [``True``]
remark: str (optional)
single line of text ("molecule name"). By default writes MDAnalysis
version and frame
.. versionchanged:: 1.0.0
Removed :code:`default_remark` variable (Issue #2692).
.. versionchanged:: 2.0.0
Due to the removal of timestep as an input for writing, the atoms
parameter is no longer relevant and has been removed. If passing
an empty universe, please use ``add_TopologyAttr`` to add in the
required elements or names.
"""
self.filename = filename
self.remark = remark
self.n_atoms = n_atoms
self.convert_units = convert_units
# can also be gz, bz2
self._xyz = util.anyopen(self.filename, 'wt')
def _get_atoms_elements_or_names(self, atoms):
"""Return a list of atom elements (if present) or fallback to atom names"""
try:
return atoms.atoms.elements
except (AttributeError, NoDataError):
try:
return atoms.atoms.names
except (AttributeError, NoDataError):
wmsg = ("Input AtomGroup or Universe does not have atom "
"elements or names attributes, writer will default "
"atom names to 'X'")
warnings.warn(wmsg)
return itertools.cycle(('X',))
[docs] def close(self):
"""Close the trajectory file and finalize the writing"""
if self._xyz is not None:
self._xyz.write("\n")
self._xyz.close()
self._xyz = None
[docs] def write(self, obj):
"""Write object `obj` at current trajectory frame to file.
Atom elements (or names) in the output are taken from the `obj` or
default to the value of the `atoms` keyword supplied to the
:class:`XYZWriter` constructor.
Parameters
----------
obj : Universe or AtomGroup
The :class:`~MDAnalysis.core.groups.AtomGroup` or
:class:`~MDAnalysis.core.universe.Universe` to write.
.. versionchanged:: 2.0.0
Deprecated support for Timestep argument has now been removed.
Use AtomGroup or Universe as an input instead.
"""
# prepare the Timestep and extract atom names if possible
# (The way it is written it should be possible to write
# trajectories with frames that differ in atom numbers
# but this is not tested.)
try:
atoms = obj.atoms
except AttributeError:
errmsg = "Input obj is neither an AtomGroup or Universe"
raise TypeError(errmsg) from None
else:
if hasattr(obj, 'universe'):
# For AtomGroup and children (Residue, ResidueGroup, Segment)
ts_full = obj.universe.trajectory.ts
if ts_full.n_atoms == atoms.n_atoms:
ts = ts_full
else:
# Only populate a time step with the selected atoms.
ts = ts_full.copy_slice(atoms.indices)
elif hasattr(obj, 'trajectory'):
# For Universe only --- get everything
ts = obj.trajectory.ts
# update atom names
self.atomnames = self._get_atoms_elements_or_names(atoms)
self._write_next_frame(ts)
def _write_next_frame(self, ts=None):
"""
Write coordinate information in *ts* to the trajectory
.. versionchanged:: 1.0.0
Print out :code:`remark` if present, otherwise use generic one
(Issue #2692).
Renamed from `write_next_timestep` to `_write_next_frame`.
"""
if ts is None:
if not hasattr(self, 'ts'):
raise NoDataError('XYZWriter: no coordinate data to write to '
'trajectory file')
else:
ts = self.ts
if self.n_atoms is not None:
if self.n_atoms != ts.n_atoms:
raise ValueError('n_atoms keyword was specified indicating '
'that this should be a trajectory of the '
'same model. But the provided TimeStep has a '
'different number ({}) then expected ({})'
''.format(ts.n_atoms, self.n_atoms))
else:
if (not isinstance(self.atomnames, itertools.cycle) and
len(self.atomnames) != ts.n_atoms):
logger.info('Trying to write a TimeStep with unknown atoms. '
'Expected {} atoms, got {}. Try using "write" if you are '
'using "_write_next_frame" directly'.format(
len(self.atomnames), ts.n_atoms))
self.atomnames = np.array([self.atomnames[0]] * ts.n_atoms)
if self.convert_units:
coordinates = self.convert_pos_to_native(
ts.positions, inplace=False)
else:
coordinates = ts.positions
# Write number of atoms
self._xyz.write("{0:d}\n".format(ts.n_atoms))
# Write remark
if self.remark is None:
remark = "frame {} | Written by MDAnalysis {} (release {})\n".format(
ts.frame, self.__class__.__name__, __version__)
self._xyz.write(remark)
else:
self._xyz.write(self.remark.strip() + "\n")
# Write content
for atom, (x, y, z) in zip(self.atomnames, coordinates):
self._xyz.write("{0!s:>8} {1:10.5f} {2:10.5f} {3:10.5f}\n"
"".format(atom, x, y, z))
[docs]class XYZReader(base.ReaderBase):
"""Reads from an XYZ file
:Data:
:attr:`ts`
Timestep object containing coordinates of current frame
:Methods:
``len(xyz)``
return number of frames in xyz
``for ts in xyz:``
iterate through trajectory
.. Note: this can read both compressed (foo.xyz) and compressed
(foo.xyz.bz2 or foo.xyz.gz) files; uncompression is handled
on the fly and also reads streams via
:class:`~MDAnalysis.lib.util.NamedStream`.
The XYZ file format follows VMD's xyzplugin_ and is also described
under :ref:`XYZ format <xyz-format>`.
.. versionchanged:: 0.11.0
Frames now 0-based instead of 1-based. Added *dt* and
*time_offset* keywords (passed to :class:`Timestep`)
"""
# Phil Fowler:
# Validation: the geometric centre of 1284 atoms was calculated over
# 500 frames using both MDAnalysis and a VMD Tcl script. There was
# exact agreement (measured to three decimal places). bzipped and
# gzipped versions of the XYZ file were also tested
format = "XYZ"
# these are assumed!
units = {'time': 'ps', 'length': 'Angstrom'}
_Timestep = Timestep
@store_init_arguments
def __init__(self, filename, **kwargs):
super(XYZReader, self).__init__(filename, **kwargs)
# the filename has been parsed to be either be foo.xyz or foo.xyz.bz2 by
# coordinates::core.py so the last file extension will tell us if it is
# bzipped or not
root, ext = os.path.splitext(self.filename)
self.xyzfile = util.anyopen(self.filename)
self.compression = ext[1:] if ext[1:] != "xyz" else None
self._cache = dict()
self.ts = self._Timestep(self.n_atoms, **self._ts_kwargs)
# Haven't quite figured out where to start with all the self._reopen()
# etc.
# (Also cannot just use seek() or reset() because that would break
# with urllib2.urlopen() streams)
self._read_next_timestep()
@property
@cached('n_atoms')
def n_atoms(self):
"""number of atoms in a frame"""
with util.anyopen(self.filename) as f:
n = f.readline()
# need to check type of n
return int(n)
@property
@cached('n_frames')
def n_frames(self):
try:
return self._read_xyz_n_frames()
except IOError:
return 0
def _read_xyz_n_frames(self):
# the number of lines in the XYZ file will be 2 greater than the
# number of atoms
linesPerFrame = self.n_atoms + 2
counter = 0
offsets = []
with util.anyopen(self.filename) as f:
line = True
while line:
if not counter % linesPerFrame:
offsets.append(f.tell())
line = f.readline()
counter += 1
# need to check this is an integer!
n_frames = int(counter / linesPerFrame)
self._offsets = offsets
return n_frames
def _read_frame(self, frame):
self.xyzfile.seek(self._offsets[frame])
self.ts.frame = frame - 1 # gets +1'd in next
return self._read_next_timestep()
def _read_next_timestep(self, ts=None):
# check that the timestep object exists
if ts is None:
ts = self.ts
f = self.xyzfile
try:
# we assume that there are only two header lines per frame
f.readline()
f.readline()
# convert all entries at the end once for optimal speed
tmp_buf = []
for i in range(self.n_atoms):
tmp_buf.append(f.readline().split()[1:4])
ts.positions = tmp_buf
ts.frame += 1
return ts
except (ValueError, IndexError) as err:
raise EOFError(err) from None
def _reopen(self):
self.close()
self.open_trajectory()
def open_trajectory(self):
if self.xyzfile is not None:
raise IOError(
errno.EALREADY, 'XYZ file already opened', self.filename)
self.xyzfile = util.anyopen(self.filename)
# reset ts
ts = self.ts
ts.frame = -1
return self.xyzfile
[docs] def Writer(self, filename, n_atoms=None, **kwargs):
"""Returns a XYZWriter for *filename* with the same parameters as this
XYZ.
Parameters
----------
filename: str
filename of the output trajectory
n_atoms: int (optional)
number of atoms. If none is given use the same number of atoms from
the reader instance is used
**kwargs:
See :class:`XYZWriter` for additional kwargs
Returns
-------
:class:`XYZWriter` (see there for more details)
See Also
--------
:class:`XYZWriter`
"""
if n_atoms is None:
n_atoms = self.n_atoms
return XYZWriter(filename, n_atoms=n_atoms, **kwargs)
[docs] def close(self):
"""Close xyz trajectory file if it was open."""
if self.xyzfile is None:
return
self.xyzfile.close()
self.xyzfile = None